ASME SB163 Alloy 600, UNS N06600 Nickel Alloy Steel Seamless Pipe
For Chemical Industry
We are one of the biggest manufactures of stainless steel & duplex
steel & alloy steel tubes and pipes in China. With development more
than 20 years, we have accumulated a great many clients all around
the world and Yuhong products also won the great praise among the
customers.
ASME B163 covers seamless tubes of nickel and nickel alloy for use
in condenser and heat-exchanger service. This covers outside
diameter and average wall, or outside diameter and minimum wall
tube. Tube shall be furnished in the alloys and conditions defined
by this specification. The material shall conform to the
composition limits of nickel, copper, molybdenum, iron, manganese,
carbon, silicon, chromium, aluminium, titanium, phosphorus, cerium,
zirconium, yttrium, born, cobalt, columblum, tungsten, and nitrogen
specified. Tensile strength, yield strength, elongation, and
Rockwell hardness of the material shall conform to the required
mechanical properties set by this specification. Test methods such
as chemical analysis, tension, rounding procedure, Rockwell
hardness, grain size and hardness conversion shall be performed.
Inconel 601 Corrosion resistance: One of the mainly performance of
601 is inexorability in high temperature, even in very inclement
conditions. If in the process of heating and cooling cycle, 601 can
generate the dense layer of oxide film to get high spalling
resistance. 601 have good carbonation resistance. With excellent
inoxidability in the high temperature of sulfur atmosphere since it
has high chromium and aluminum content.
Specification:
Pipe Specification : ASTM B163, B516 / ASME SB163, SB516
Size : 1/8″NB TO 30″NB IN
Thickness Range : 0.3mm – 50 mm
Schedule : SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80,
SCH120, SCH140, SCH160, XXS
Type : Seamless Tube, Welded Tube, ERW Tube, Fabricated Tube, CDW
Form : Round Tubes, Square Tubes, Rectangular Tube
Length : Single Random, Double Random & Cut Length.
End : Plain End, Beveled End, Threaded
End Protection : Plastic Caps
Outside Finish : 2B, No.1, No.4, No.8 Mirror Finish
Finish : Annealed and Pickled, Polished, Bright Annealed, Cold
Drawn
External Coating : 3LPE / 3LPP/ FBE/ DFBE/ PP
Origin : Indian Origin, European Origin, Japanese Origin.
Testing and Documents : Mill Test Certificates, EN 10204 3.1,
Chemical Reports, Mechanical Reports, Destructive Test Report, Non
Destructive Test Reports, PMI Test Reports, Visual Inspection
Reports, Third Party Inspection Reports, NABL Approved Lab Reports
Packing : Packed in Wooden Boxes, Bubble wraps, Steel Strips
Bundled, or as per Customers Requests
Characteristics:
- Excellent inoxidability in the high temperature.
- Good resistance to carbonizing.
- Good inoxidabilitiy in sulfur atmosphere
- Good mechanical properties in both room temperature and high
temperature.
- Good resistance to stress corrosion cracking, 601 have high creep
rupture strength since it limits the carbon content and grain size,
so recommend to use for above 500℃ environment.
Chemical Composition:
| Alloy | % | Ni | Cr | Fe | C | Mn | Si | Cu | Al | P | S |
| ASTM B163 N06601 | Min. | 58 | 21 | | | | | | 1 | | |
| ASTM B163 N06601 | Max. | 63 | 25 | balance | 0.1 | 1 | 0.5 | 1 | 1.7 | 0.02 | 0.015 |
| Alloy | % | Ni | Cr | Fe | C | Mn | Si | Cu | Al | P | S |
| ASTM B167 N06601 | Min. | 58 | 21 | | | | | | 1 | | |
| ASTM B167 N06601 | Max. | 63 | 25 | balance | 0.1 | 1.5 | 0.5 | 1 | 1.7 | 0.02 | 0.015 |
Mechanical Properties:
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Inconel 601 | 8.1 g/cm3 | 1411 °C (2571 °F) | Psi – 80,000 , MPa – 550 | Psi – 30,000 , MPa – 205 | 30% |
